产品中心
您的位置: 首页 > 产品中心 > ZEC > 热塑性软管系列
热塑性软管系列
VE8M系列
聚酰胺内芯,芳纶纤维增强,抗磨损聚氨酯外层; 根据需求,还可提供空气和兼容气体的微穿孔版本。这些软管不能消除输送不导电液体时可能积聚的静电电荷。
Internal core in polyamide, aramidic fiber reinforcement, exterior covering in polyurethane antiabrasion; on request it is also available in micro perforated version for air and compatible gas.These  hoses  cannot  dissipate the electrostatic  charges  that  may  be accumulated in case of conveying non-conducting fluids.
下载PDF
商品详情
应用程序:
VE8M 系列软管是为多元醇、溶剂、油漆和相容气体的非常高的压力传导而设计的。
Applications:
The VE8M series hoses have been created for the very high pressure conduction of Polyols, Solvents, Paints and compatible gas.
 
使用温度:
从–40°C 到+100°C
空气、水和含水液体的最高工作温度: + 70°C。(+158°F)
Utilization temperature:
From –40°C to +100°C
Max. working temperature of air, water and fluids containing water:+ 70°C. (+158°F)
 
工作压力: 
安全比例 1:4
Working pressure:
Safety ratio 1:4
 
真空等级:
0.93 bar
Vacuum Rating:
0.93 bar
 
规格说明:
这些软管符合或超过标准 SAE J517 sez. SAE 100R8 - ISO 3949。
*我们建议使用ZEC型多螺旋接头。
Specifications:
These hoses meet or exceed standards SAE J517 sec. SAE 100R8 - ISO 3949.
* We recommend the use of FITTINGS ZEC type MULTISPIRAL.

规格参数:

 
热塑性软管VE8M系列
THERMOPLASTIC HOSES VE8M SERIES
  Ø 压力在 23° 压力 半径    
参考 内径 (inch) 内径 (mm) 外径 (inch) 外径(mm) 爆破(最小)(bar) 工作(最大)(bar) 弯曲(最小)(mm) 弯曲(最小)(inch) 重量(g/m) 金属箍代码
VE8M9440000 5/32" 4 0.37 9.4 2800 700 30 1.18 57 BP5320L8M
VE8M20000HP 3/16” 4.8 0.444 11.3 2800 700 30 1.18 91 BP316MTK
VE8M30000 1/4” 6.4 0.583 14.8 2800 700 50 1.97 142 BP14R9R
VE8M50000 3/8” 9.7 0.63 16 1400 350 80 3.15 166 BP38R7V
VE8M50000HP 3/8” 9.7 0.709 18 2800 700 90 3.54 190 BP38R9R
VE8M60100 1/2” 13 0.866 22 1400 350 100 3.94 278 BP12R9R
VE8M80100 3/4” 19.2 1.142 29 1380 345 205 8.07 403 BP34R9R
VE8M90100 1” 25.8 1.378 35 1000 250 230 9.06 486 BP1R9R
VE8M100100 1"1/4 32 1.772 45 1000 250 350 13.78 830 BP114MTKHM

广州沃夫曼管业有限公司地址:广东省广州市增城区新塘镇石新大道232号凯昌工业区A区A1栋4楼(原汉虎大厦) 备案号:粤ICP备12021590号 网站建设:顶呱呱