产品中心
您的位置: 首页 > 产品中心 > ZEC > 热塑性软管系列
热塑性软管系列
VE7系列
聚酰胺内芯,聚酯纤维增强,外覆抗磨损聚氨酯,根据需 求,还可提供空气和兼容气体的微穿孔版本。这些软管不能消除输送不导电液体时可能积聚的静电电荷。
Internal core in polyamide, reinforcement in polyester fiber,exterior covering in antiabrasion polyurethane; on request it is also available in micro perforated version for air and compatible gas.These hoses cannot dissipate the electrostatic charges that may be accumulated in case of conveying non-conducting fluids.
下载PDF
商品详情
应用程序:
VE7 系列软管是为多元醇、溶剂、油漆和相容气体的中压传导而设计。
Applications:
The  VE7  series  hoses  have  been  created  for  the  medium  pressure conduction of Polyols, Solvents, Paints and compatible gas.
 
使用温度:
从–40°C 到+100°C
空气、水和含水液体的最高工作温度:+ 70°C。(+158°F)
Utilization temperature:
From –40°C to +100°C
Max.working temperature of air,water and fluids containing water:+ 70°C. (+158°F)
 
工作压力: 
动压安全比 1:4
静压安全比 1:3
Working pressure:
Safety ratio 1:4 for DYNAMIC pressure.
Safety ratio 1:3 for STATIC pressure.
 
真空等级:
0,93 bar
Vacuum Rating:
0.93 bar
 
规格说明:
这些软管符合或超过标准SAE J517 sec. SAE 100R7 - ISO 3949。
Specifications:
These hoses meet or exceed standards SAE J517 sec. SAE 100R7 - ISO 3949.

规格参数:


热塑性软管VE7系列
THERMOPLASTIC HOSES VE7 SERIES
  Ø 压力在 23° 安全比例 1:4 安全比例 1:3 半径    
参考 内径 (inch) 内径 (mm) 外径 (inch) 外径(mm) 爆破(最小)(bar) 工作(最大)(bar) 工作(最大)(bar) 弯曲(最小)(mm) 弯曲(最小)(inch) 重量(g/m) 金属箍代码
VE710000 1/8" 3.5 0.335 8.5 920 230 307 25 0.98 54 BP18R7
VE720000 3/16" 4.8 0.394 10 840 210 280 30 1.18 68 BP316R7
VE730000 1/4" 6.4 0.465 11.8 800 200 267 35 1.38 87 BP14R7
VE740000 5/16" 8 0.563 14.3 760 190 253 45 1.77 126 BP516R7V
VE750000 3/8" 9.7 0.63 16 700 175 233 55 2.17 146 BP38R7V
VE760100 1/2" 13 0.799 20.3 560 140 187 75 2.95 214 BP12R7V
VE770100 5/8" 16 0.925 23.5 420 105 140 120 4.72 258 BP58R7
VE780100 3/4" 19.2 1.043 26.5 360 90 120 145 5.71 301 BP34R7
VE790100 1" 25.6 1.322 33.6 280 70 93 200 7.87 369 BP1R8

广州沃夫曼管业有限公司地址:广东省广州市增城区新塘镇石新大道232号凯昌工业区A区A1栋4楼(原汉虎大厦) 备案号:粤ICP备12021590号 网站建设:顶呱呱